010203
Mochini oa ho tima oa induction bakeng sa lisebelisoa, o nang le kalafo ea likarolo tsa ho hanyetsa ho fumana bokaholimo bo thata bo thata
Tlhaloso ea Sehlahisoa
E na le taolo e tsoetseng pele ea mocheso (± 5 ° C ho nepahala) le lits'ebetso tse ikatisang tsa ho tima, e netefatsa botebo bo sa fetoheng ba ho thatafala (0.5-5mm bo ka fetolehang) bakeng sa li-alloys tse fapaneng tsa tšepe. E loketse lisebelisoa tsa likoloi, tsa sefofane le tsa metjhini e boima, mochini ona o ntlafatsa nako ea bophelo le mokhathala ha o ntse o fokotsa ho khopama le oxidation.
Tharollo e theko e tlaase bakeng sa tlhahiso e kholo ea likarolo tse thata tse sebetsang hantle.
Sebaka sa kopo
Mochini ona oa ho tima li-induction o etselitsoe ka ho khetheha kalafo ea mocheso ea likere, li-bearings le likarolo tse ling tse hananang le ho roala. E fana ka mokhoa o hlakileng oa ho thatafatsa bokaholimo ho fihlela lera le thata, le sa senyeheng ha o ntse o boloka mokokotlo o thata, oa ductile.
E loketse phetisetso ea likoloi, mechini ea indasteri le lisebelisoa tse boima, sistimi e matlafatsa ts'ebetso e tšoarellang le ho hanyetsa mokhathala. Ka matla a feto-fetohang (15-200kW) le maqhubu (1-30kHz), e amohela boholo le lisebelisoa tse fapaneng, ho netefatsa botebo bo tsitsitseng ba boima (0.5-5mm). Lisebelisoa li kenyelletsa ho thatafatsa leino la gear, ho tima peiso, le kalafo ea bokaholimo ba shaft, ho ntlafatsa ts'ebetso maemong a khatello e phahameng ea maikutlo.
Mochini o ts'ehetsa tlhahiso ea othomathike ka kopanyo ea PLC bakeng sa liphetho tse phetoang.
(Tlhokomeliso: E ka tloaeleha bakeng sa likarolo tse itseng tsa geometri le litlhoko tse thata.)
Tlhophiso le Tshebetso
Mochini oa ho tima oa Induction - Tlhophiso le Ts'ebetso
Tlhophiso:
Sistimi ea Matla: 380V, 3-mohato, 50/60Hz keno ka theknoloji ea inverter ea IGBT (15-200kW matla a fetohang).
Sebaka sa Maqhubu: 1-30kHz (tokiso e iketsang bakeng sa botebo bo nepahetseng ba ho thatafatsa).
Coil e timang: Meralo e ikhethileng ea li-inductor ea koporo bakeng sa likere, li-bearings le li-geometri tse rarahaneng.
Sistimi e Pholisang: Pholiso ea metsi a khatello e phahameng (≥25L/min) bakeng sa ts'ebetso e tsoelang pele.
Sistimi ea Taolo: HMI ea "touchscreen" e nang le kopanyo ea PLC (RS485 / Modbus) bakeng sa taolo ea ts'ebetso e ikemetseng.
Tshebetso:
Botebo ba ho thatafatsa: 0.5-5mm (e ka fetoloa bakeng sa ho thatafatsa nyeoe kapa ka ho thatafatsa).
Mocheso oa Mocheso: 800-1200 ° C (PID e laoloang bakeng sa ho futhumala ho tšoanang).
Lebelo: Ho futhumatsa ka potlako (5-30 sec ka karolo e 'ngoe) ka ho pheta-pheta hantle (± 5 ° C).
Tšebelisano ea lintho tse bonahalang: Tšepe ea carbon, tšepe ea alloy, le tšepe ea lisebelisoa (mohlala, AISI 1045, 4140, 52100).
Durability: 100% potoloho ea mosebetsi e nang le ts'ireletso ea overcurrent / overvoltage.
Lits'ebetso: Meno a gear, merabe e belehang, li-shafts, le likaroloana tse sa senyeheng tse hlokang ho thatafala ha holimo (HRC 50-65) tse nang le mantlha a thata.
(Tlhokomeliso: E ka tloaeleha bakeng sa likarolo tse itseng tsa litekanyo le liprofaele tse thata.)
Litlhaloso tsa tekheniki
Litlhaloso tsa Tekheniki tsa Mochini oa ho Tlosa oa Induction bakeng sa Li-Gears & Bearings:
1.Phepelo ea Matla: 380V±10%, 3-phase, 50/60Hz e nang le thekenoloji ea inverter ea IGBT (15-200kW e ka fetolehang).
2.Frequency Range: 1-30kHz (tokiso e iketsang bakeng sa taolo e nepahetseng ea botebo ba 0.5-5mm).
3.Quenching Speed: Ho futhumatsa ka potlako ka metsotsoana ea 5-30 ka karolo e 'ngoe le e 'ngoe e nang le mocheso o ts'oanang (± 5 ° C).
4.Mocheso oa Mocheso: 800-1200 ° C (PID-e laoloang bakeng sa ho thatafatsa holim'a metsi ho fihlela HRC 50-65).
5.Sistimi ea Pholiso: Ho pholisa metsi ka khatello e phahameng (≥25L/min @ 0.3MPa) bakeng sa ts'ebetso e tsoelang pele.
6.Moetso oa Coil: Li-inductors tsa koporo tse feto-fetohang tse ngata bakeng sa likere, li-bearings le li-geometri tse rarahaneng.
7.Control System: 10" HMI ea "touchscreen" e nang le sebopeho sa PLC (RS485 / Modbus) bakeng sa taolo ea ts'ebetso e ikemetseng.
8.Safety & Compliance: ISO e netefalitsoe ka tšireletso e feteletseng, overvoltage, le tšireletso e feteletseng.
Tlhokomeliso: E ts'ehetsa litšepe tsa carbon/alloy (AISI 1045, 4140, 52100) bakeng sa lisebelisoa tse sa senyeheng.
Likarolo tse kholo:
